Mubychem Group, established in 1976, is the pioneer manufacturer of Ammonium Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Ammonium Chloride BP USP FCC Food Grade ACS Manufacturers
USP BP IP ACS FCC Food Grade, AR Analytical Reagent Grade
MSDS Click here
Ammonium Chloride BP USP IP FCC ACS FCC Food grade Manufacturers
Ammonium Chloride IP LR AR Analytical Reagent Technical & Pure Manufacturers
Ammonium Chloride USP
Assay— Ammonium Chloride contains not less than 99.5 percent and not more than 100.5 percent of NH4Cl, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Identification— A solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0, in a solution (1 in 20).
Loss on drying— Dry it over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition— Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture gently until volatilization is complete: the residue is white, and when ignited, not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate— Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.
Ammonium Chloride BP
Content or Assay
99.0 per cent to 100.5 per cent (On dried substance basis).
White or almost white, crystalline powder or colourless crystals.
Freely soluble in water.
A. It gives the reactions of chlorides.
B. 10 ml of solution gives the reaction of ammonium salts.
A 10% solution:
Appearance of solution: Solution is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides and iodides: To 10 ml of solution S add 0.1 ml of dilute hydrochloric acid R and 0.05 ml of chloramine solution. After 1 min, add 2 ml of chloroform R and shake vigorously. The chloroform layer remains colourless.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.00 g by drying in an oven at 105 °C for 2 h.
Sulphated ash: Maximum 0.1 per cent, determined on 2.0 g.
Ammonium Chloride FCC Food Grade
NH4Cl Formula wt 53.49
Ammonium Chloride occurs as colorless crystals or as a white, fine or coarse, crystalline powder. It is somewhat hygroscopic. One gram dissolves in 2.6 mL of water at 25°, in 1.4 mL of boiling water, in about 100 mL of alcohol, and in about 8 mL of glycerin. The pH of a 1:20 solution is between 4.5 and 6.0.
Identification: A 1:10 aqueous solution gives positive tests for Ammonium and for Chloride.
Assay: Not less than 99.0% of NH4Cl after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying: Not more than 0.5%.
Ammonium Chloride ACS
American Chemical Society Analytical Reagent Grade
NH4Cl Formula Wt 53.49
CAS Number 12125–02–9
Assay . . . . . . . . . . . . . . . . ≥99.5% NH4Cl
pH of a 5% solution . . . . . 4.5–5.5 at 25 °C
Insoluble matter . . . . . . . . 0.005%
Residue after ignition . . . . 0.01%
Calcium (Ca) . . . . . . . . . . 0.001%
Magnesium (Mg) . . . . . . . 5 ppm
Heavy metals (as Pb) . . . . 5 ppm
Iron (Fe) . . . . . . . . . . . . . 2 ppm
Phosphate (PO4). . . . . . . 2 ppm
Sulfate (SO4). . . . . . . . ... 0.002%
Ammonium Chloride manufacturers
Ammonium Chloride BP USP IP FCC ACS Food AR Grade Manufacturers:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: email@example.com
Copyright and Usual Disclaimer is Applicable.
Old Spice: Manufacturing since more than Three Decades: Ammonium Chloride Calcium Chloride Magnesium Chloride Magnesium Sulfate Potassium Chloride Sodium Acetate Sodium Thiosulfate Zinc Chloride Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Hydroxide Pellets Sodium Phosphate Sodium Thiosulfate Sodium Propionate Zinc Chloride Other Best Seller Products: Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Cupric Chloride Potassium Phosphate Sodium Formate Sodium Formaldehyde Bisulfite Sodium Nitrite Nitrate Sodium Phosphate Tertiary Butylhydroquinone Zinc Sulphate Zinc Ammonium Chloride Flux
Global or International Ammonium Chloride Pure BP USP FCC Food Grade Commercial Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.