|
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Monochloroacetate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Monochloroacetate Sodium Chloroacetate Manufacturers, MSDS Sheet
Sodium Monochloroacetate Manufacturers; Sodium Chloroacetate Manufacturers
Sodium Monochloroacetate
Sodium Chloroacetate, Sodium Mono Chloro Acetate
Sodium Chloroacetate MSDS Sheet, Sodium Monochloroacetate Material Safety Data Sheet
Chloroacetic Acid Monosodium SaltChloroacetic Acid Sodium Salt
1. Product Identification
Synonyms: Sodium Chloroacetate; Monoxone; Sodium
Monochloroacetate; Chloroacetic Acid, Sodium Salt.
CAS No.: 3926-62-3
Molecular Weight: 116.48
Chemical Formula: ClCH2COONa
2. Composition/Information on Ingredients
Ingredient: Sodium chloroacetate or Sodium Monochloroacetate
CAS No.: 3926-62-3
Percent: 90 - 100%
3. Hazards Identification
Emergency Overview
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN,
EYES AND RESPIRATORY TRACT.
Sodium Monochloroacetate or Sodium
Chloroacetate very hazardous in case of skin contact (irritant), of eye
contact (irritant), of ingestion, of inhalation (lung irritant).
Hazardous in case of skin contact (sensitizer), of inhalation (lung
sensitizer). Slightly hazardous in case of skin contact (corrosive,
permeator). Severe over-exposure can result in death. Inflammation of
the eye is characterized by redness, watering, and itching. Skin
inflammation is characterized by itching, scaling, reddening or
occasionally, blistering.
Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES
Potential Health Effects
Inhalation: Sodium Monochloroacetate or Sodium Chloroacetate causes
irritation to the respiratory tract. Symptoms may include coughing,
shortness of breath.
Ingestion: Tests with laboratory animals indicate this material is toxic
by ingestion. Toxic effects could include convulsions, seizures and
death. Causes irritation to the gastrointestinal tract. Symptoms may
include nausea, vomiting and diarrhea.
Skin Contact: Causes irritation to skin. Symptoms include redness,
itching, and pain.
Eye Contact: Causes irritation, redness, and pain.
4. First Aid Measures
Inhalation: Remove to
fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel.
Never give anything by mouth to an unconscious person. Get medical
attention.
Skin Contact: Immediately flush skin with plenty of water for at least
15 minutes. Remove contaminated clothing and shoes. Get medical
attention. Wash clothing before reuse. Thoroughly clean shoes before
reuse.
Eye Contact: Check for and remove any contact lenses. Immediately flush
eyes with running water for at least 15 minutes, keeping eyelids open.
Cold water may be used. Do not use an eye ointment. Seek medical
attention.
5. Fire Fighting Measures
Fire: Sodium Monochloroacetate or Sodium
Chloroacetate is not expected to be a fire hazard.
Explosion: No information found.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or
carbon dioxide.
Special Information: In the event of a fire, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full
face piece operated in the pressure demand or other positive pressure
mode.
6. Accidental Release Measures
Small Spill: Use appropriate tools to put
the spilled solid in a convenient waste disposal container.
Large Spill:
Use a shovel to put the
material into a convenient waste disposal container.
7. Handling and Storage
Keep Sodium Monochloroacetate or Sodium Chloroacetate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Sodium Monochloroacetate or Sodium Chloroacetate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions
of the contaminant at its source, preventing dispersion of it into the
general work area. Please refer to the ACGIH document, Industrial
Ventilation, A Manual of Recommended Practices, most recent edition,
for details.
Personal Respirators (NIOSH Approved): For conditions of use where
exposure to dust or mist is apparent and engineering controls are not
feasible, a particulate respirator (NIOSH type N95 or better filters)
may be worn. If oil particles (e.g. lubricants, cutting fluids,
glycerin, etc.) are present, use a NIOSH type R or P filter. For
emergencies or instances where the exposure levels are not known, use a
full-face positive-pressure, air-supplied respirator. WARNING:
Air-purifying respirators do not protect workers in oxygen-deficient
atmospheres.
Skin Protection: Wear protective gloves and clean body-covering
clothing.
Eye Protection: Use chemical safety goggles and/or full face shield
where dusting or splashing of solutions is possible. Maintain eye wash
fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Sodium Monochloroacetate or Sodium
Chloroacetate is white powder.
Odor: Odorless.
Solubility: Appreciable (> 10%)
Specific Gravity: No information found.
pH: 5.5
% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: 170C (338F)
10. Stability and
Reactivity
Stability: Sodium Monochloroacetate or Sodium
Chloroacetate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: May emit hydrogen chloride, chlorine,
and oxides of sodium and carbon when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong acids.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Sodium Chloroacetate: Oral rat LD50: 95 mg/kg.
--------\Cancer
Lists\------------- -----------------------------
----------------------------------- ---NTP Carcinogen---
Ingredient
------------------------ Known -- Anticipated -- IARC
Category
----------------------------------- ----- -----------
----
Sodium chloroacetate (3926-62-3) -- No ----- No ----------- None
12. Ecological Information
Environmental Fate:
No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Sodium Monochloroacetate or Sodium Chloroacetate container and unused contents in accordance with law.
14. Transport Information
Domestic (Land, D.O.T.)
Proper Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN/NA: UN2659
Packing Group: III
International (Water, I.M.O.)
Proper Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN/NA: UN2659
Packing Group: III
International (Air, I.C.A.O.)
Proper Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN/NA: UN2659
Packing Group: III
15. Regulatory Information
--------\Chemical Inventory Status - Part
1\--------------------
Ingredient --------------------- TSCA EC Japan Australia
-------------------------------
---- --- ----- ---------
Sodium chloroacetate
(3926-62-3) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part
2\--------------------
--------------------------------------- --Canada-
Ingredient
--------------------- Korea DSL NDSL Phil.
-------------------------------- ----- --- ---- -----
Sodium chloroacetate
(3926-62-3) Yes Yes No Yes
USA Federal, State & International
Regulations - Part 1\--------
-------------------------------- SARA 302 ------SARA 313------
Ingredient --------------------- RQ TPQ List Chemical Catg.
-------------------------------- --- --- ---- --------------
Sodium chloroacetate (3926-62-3) No No No No
USA Federal, State & International
Regulations - Part 2\--------
--------------------------------
-RCRA- -TSCA-
Ingredient --------------------- CERCLA 261.33 8(d)
-------------------------------- ------ ------ ------
Sodium chloroacetate (3926-62-3) No No No
Chemical Weapons Convention: No; TSCA
12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: 2X
US Federal and State Regulations:
New Jersey: Chloroacetic acid, monosodium salt TSCA 8(b) inventory:
Chloroacetic acid, monosodium salt
OSHA: Hazardous by definition of Hazard Communication Standard (29
CFR 1910.1200).
EINECS: This product is on the European Inventory of Existing
Commercial Chemical Substances.
WHMIS (Canada):
CLASS D-1B: Material causing immediate and serious toxic effects (TOXIC).
CLASS D-2B: Material causing other toxic effects (TOXIC).
DSCL (EEC):
R25- Toxic if swallowed. R37/38- Irritating to respiratory system and
skin. R41- Risk of serious damage to eyes. R42/43- May cause sensitization
by inhalation and skin contact.
HMIS (U.S.A.):
Health Hazard: 3
Fire Hazard: 1
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 3
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified
respirator or equivalent. Wear appropriate respirator when ventilation is
inadequate. Splash goggles.
16. Other Information
Disclaimer:
******************************
Our company provides this
Sodium Chloroacetate or Monochloroacetate MSDS information sheet contained herein in good faith but
makes no representation as to its comprehensiveness or accuracy. This
Sodium Chloroacetate MSDS sheet
is intended only as a guide to the appropriate precautionary handling of
the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
******************************
Sodium Chloroacetate, Sodium Monochloroacetate manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Chloroacetate or Sodium Monochloro Acetate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.