Mubychem Group, established in 1976, is the pioneer manufacturer of Caustic Potash Potassium Hydroxide Pellets, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter India Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Chemicals Container Leak Proof Drum Quick Delivery

Caustic Potash Potassium Hydroxide Pellets Flakes Powder USP BP Ph Eur IP ACS FCC Food grade Manufacturers

MSDS of Caustic Potash Potassium Hydroxide IP BP USP ACS Analytical Reagent FCC Food grade Pellets Manufacturers

Potassium Hydroxide
Technical & Pure Tablets, Pellets
CAS Number 1310-58-3, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Potassium Hydroxide Pellets

Potassium Hydroxide BP Ph Eur Grade Specifications

Caustic Potash
KOH -- 56.11 -- CAS Number 1310-58-3

DEFINITION
Potassium hydroxide contains not less than 85.0 per cent and not more than the equivalent of 100.5 per cent of total alkali, calculated as KOH.

CHARACTERS
White, crystalline, hard masses, supplied as sticks, pellets or irregularly shaped pieces, deliquescent in air, hygroscopic, absorbing carbon dioxide, very soluble in water, freely soluble in alcohol.

IDENTIFICATION
A. Dissolve 0.1 g in 10 ml of water (this solution is used for identification test B). Dilute 1 ml of the solution to 100 ml with water. The pH of this solution is not less than 10.5.
B. 1 ml of the initial solution prepared in identification test A gives reaction of potassium.

TESTS
Solution S1
Dissolve 2.5 g in 10 ml of water. Carefully add 2 ml of nitric acid, with cooling,  and dilute to 25 ml with dilute nitric acid.
Solution S2
Dissolve 10 g in 15 ml of distilled water. Carefully add 12 ml of hydrochloric acid,  with cooling, and dilute to 50 ml with dilute hydrochloric acid.
Appearance of solution
Dissolve 5 g in carbon dioxide-free water and dilute to 50 ml with the same solvent.  The solution is clear and colourless.
Carbonates
Not more than 2.0 per cent, calculated as K2CO3.
Chlorides
Dilute 10 ml of solution S1 to 15 ml with water. The solution complies with the limit test for chlorides (50 ppm).
Phosphates
Dilute 5 ml of solution S1 to 100 ml with water. The solution complies with the limit test for phosphates (20 ppm).
Sulphates
15 ml of solution S2 complies with the limit test for sulphates (50 ppm).
Aluminium
If intended for use in the manufacture of hem dialysis solutions, it complies with the  test for aluminium. Dissolve 20 g in 100 ml of water and add 10 ml of acetate  buffer solution pH 6.0. The solution complies with the limit test for aluminium (0.2  ppm). Use as the reference solution a mixture of 2 ml of aluminium standard solution  (2 ppm Al), 10 ml of acetate buffer solution pH 6.0 and 98 ml of water. To prepare the blank use a mixture of 10 ml of acetate buffer solution pH 6.0 R and 100  ml of water.
Iron
Dilute 5 ml of solution S2 to 10 ml with water R. The solution complies with the limit  test for iron (10 ppm).
Sodium
Not more than 1.0 per cent of Na, determined by atomic absorption spectrometry.
Heavy metals
Dilute 10 ml of solution S2 to 20 ml with water. 12 ml of the solution complies with limit test A for heavy metals (10 ppm). Prepare the standard using lead standard  solution (1 ppm Pb).


Potassium Hydroxide USP NF Grade Specifications

Potassium Hydroxide
KOH 56.11
Potassium hydroxide.
Potassium hydroxide [CAS 1310-58-3].

Potassium Hydroxide contains not less than 85.0 percent of total alkali, calculated as KOH, including not more than 3.5 percent of K2CO3.

Identification— A solution (1 in 25) responds to the tests for Potassium.
Insoluble substances— Dissolve 1 g in 20 mL of water: the solution is complete, clear, and colorless.
Heavy metals— Dissolve 0.67 g in a mixture of 5 mL of water and 7 mL of 3 N hydrochloric acid. Heat to boiling, cool, and dilute with water to 25 mL: the limit is 0.003%.


Potassium Hydroxide FCC Food Grade Specifications

Caustic Potash
KOH Formula weight 56.11
INS: 525 CAS 1310-58-3

DESCRIPTION
Potassium Hydroxide occurs as white or nearly white pellets, flakes, sticks, fused masses, or other forms. Upon exposure to air, it readily absorbs carbon dioxide and moisture, and it deliquesces. One gram dissolves in 1 mL of water, in about 3 mL of alcohol, and in about 2.5 mL of glycerin. It is very soluble in boiling alcohol.

Function: pH control.

REQUIREMENTS
Identification: A 1:25 aqueous solution gives positive tests for Potassium.
Assay: Not less than 85.0% and not more than 100.5% of total alkali, calculated as KOH.
Carbonate (as K2CO3): Not more than 3.5%.
Insoluble Substances: Passes test.
Lead: Not more than 2 mg/kg.
Mercury: Not more than 0.1 mg/kg.


Potassium Hydroxide ACS Reagent Grade Specifications

KOH
Formula Weight 56.11
CAS Number 1310-58-3
NOTE. Reagent potassium hydroxide usually contains 10-15% water.

REQUIREMENTS
Assay and potassium carbonate: 85% KOH and 2.0% K2CO3

MAXIMUM ALLOWABLE
Chloride (Cl) ............................... 0.01%
Nitrogen compounds (as N) ........ 0.001%
Phosphate (PO4) ........................ 5 ppm
Sulfate (SO4) .............................. 0.003%
Ammonium hydroxide precipitate . 0.02%
Heavy metals (as Ag) .................. 0.001%
Iron (Fe) ..................................... 0.001%
Nickel (Ni) ................................. 0.001%
Sodium (Na) .............................. 0.05%

Potassium Hydroxide BP USP IP ACs Analytical Reagent FCC Food grade Pellets Manufacturers:

MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: us@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Aluminium Potassium Sulphate; Potash Alum  
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux Oil Field Chemicals

Caustic Potash Potassium Hydroxide IP BP USP ACS AR Analytical Reagent FCC Food grade Pellets Manufacturers

Global or International Potassium Hydroxide Pellets Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.

29-Apr-2022