Mubychem Group, established in 1976, is the pioneer manufacturer of Borax Sodium Borate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Borax BP Sodium Borate USP NF ACS IP Manufacturers
USP-NF BP ACS IP
MSDS of Borax Sodium Borate BP USP NF IP ACS FCC Grade Manufacturers
Borax
Technical & Pure Crystals, Sodium Borate
CAS Number 1303-96-4 and 1330-43-4 IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Borax BP Ph Eur Grade Specifications
Borax BP; Sodium Borate; Sodium Tetraborate
Na2B4O7,10H2O -- 381.4 -- CAS Number 1303-96-4
DEFINITION
Borax contains not less than 99.0 per cent and not more than the equivalent
of 103.0 per cent of disodium tetraborate decahydrate.
CHARACTERS
A white, crystalline powder, colourless crystals or crystalline masses,
efflorescent, soluble in water, very soluble in boiling water, freely soluble in
glycerol.
IDENTIFICATION
A. To 1 ml of solution S (see Tests) add 0.1 ml of
sulphuric acid and 5 ml of methanol \ and ignite. The flame has a green border.
B. To 5 ml of solution S add 0.1 ml of
phenolphthalein solution.
The solution is red. On the addition of 5 ml of glycerol (85 per cent) the colour disappears.
C. Solution S gives the reactions of sodium.
TESTS
Solution S
Dissolve 4.0 g in carbon dioxide-free water
prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
The pH of solution S is 9.0 to 9.6.
Sulphates
15 ml of solution S complies with the limit test for sulphates (50 ppm).
Ammonium
6 ml of solution S diluted to 14 ml with water complies with the
limit test for ammonium (10 ppm).
Arsenic
5 ml of solution S complies with limit test A for arsenic (5 ppm).
Calcium
15 ml of solution S complies with the limit test for calcium (100 ppm).
Heavy metals
12 ml of solution S complies with limit test A for heavy metals (25 ppm).
Sodium Borate USP NF Grade Specifications
Sodium Borate USP-NF;
Borax USP NF
Na2B4O7-10H2O -- 381.37
Borax
Borax [CAS 1303-96-4]
Anhydrous 201.22 [CAS 1330-43-4]
Sodium Borate contains an amount of Na2B4O7 equivalent to not less than 99.0 percent and not more than 105.0 percent of Na2B4O7·10H2O.
Identification—
A solution (1 in 20) responds to the tests for Sodium and for Borate.
Carbonate and bicarbonate— To 5 mL of a solution (1 in 20), contained in a
test tube, add 1 mL of 3 N hydrochloric acid: no effervescence is observed.
Heavy metals— the limit is 0.002%.
Sodium Borate Decahydrate or Borax ACS Grade Specifications
Sodium Tetraborate Decahydrate ACS
Na2B4O7 . 10H2O
Formula Weight 381.37
CAS Number 1303-96-4
REQUIREMENTS
Assay: 99.5-105.0% Na2B4O7 .
10H2O
pH of a 0.01 M solution: 9.15-9.20 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ........... 0.005%
Chloride (Cl) ............... 0.001%
Phosphate (PO4) ......... 0.001%
Sulfate (SO4) .............. 0.005%
Calcium (Ca) ............... 0.005%
Heavy metals (as Pb) ... 0.001%
Iron (Fe) ..................... 5 ppm
Borax BP
Sodium Borate USP NF ACS
Manufacturers
or
Sodium Tetraborate or Sodium Borate
Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
28-Apr-2022