|
Mubychem Group, established in 1976, is the pioneer manufacturer of Disodium Phosphate Sodium Phosphate Dibasic, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Disodium Phosphate Sodium Phosphate Dibasic Manufacturers, MSDS Sheet
Mono Di Tri Sodium Phosphate Commercial & IP grade Manufacturers
Sodium Phosphate Dibasic
Technical & Pure Disodium Phosphate, Dibasic Sodium Phosphate
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Sodium Phosphate Dibasic MSDS Sheet, Material Safety Data Sheet Disodium Phosphate
1. Product Identification
Synonyms:
Disodium phosphate; DSP; Disodium hydrogen phosphate,
Di sodium phosphate; Sodium phosphate dibasic.
CAS No.: 7558-79-4
Molecular Weight: 141.96
Chemical Formula: Na2HPO4
2. Composition/Information on Ingredients
Ingredient: Di Sodium Phosphate, Disodium phosphate or Sodium Phosphate Dibasic
or
Dibasic Sodium Phosphate
CAS No.: 7558-79-4 98
Percent: 100%
3. Hazards Identification
Emergency
Overview
--------------------------
CAUTION! MAY CAUSE IRRITATION TO
SKIN, EYES, AND RESPIRATORY TRACT. MAY BE HARMFUL IF SWALLOWED OR INHALED
Health Rating: 2 - Moderate (Life)
Flammability Rating: 0 - None
Reactivity Rating: 1 - Slight
Contact Rating: 2 - Moderate
Lab Protective Equip: GOGGLES; LAB COAT
Storage Color Code: Green (General Storage)
----------------------------------
Potential Health Effects
----------------------------------
Inhalation: Sodium Phosphate Dibasic may cause irritation to the respiratory tract. Symptoms may include coughing and
shortness of breath.
Ingestion: Phosphates are slowly and incompletely absorbed when ingested, and seldom result
in systemic effects. Such effects, however, have occurred. Symptoms may include
vomiting, lethargy, diarrhea, blood chemistry effects, heart disturbances and
central nervous system effects. The toxicity of phosphates is because of their
ability to sequester calcium.
Skin Contact: Di Sodium Phosphate may cause irritation with redness and pain.
Eye Contact: Sodium phosphate dibasic may cause irritation, redness and pain.
Chronic Exposure:
Disodium phosphate may sequester calcium and cause calcium phosphate deposits in the kidneys.
Chronic ingestion or inhalation may induce systemic phosphorous poisoning. Liver
damage, kidney damage, jaw/tooth abnormalities, blood disorders and
cardiovascular effects can result.
Aggravation of Pre-existing Conditions:
Persons with pre-existing skin disorders or eye problems, jaw/tooth
abnormalities, or impaired liver, kidney or respiratory function may be more
susceptible to the effects of the substance.
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an
unconscious person. Get medical attention.
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes. Remove
contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean
shoes before reuse. Get medical attention if irritation develops.
Eye Contact:
Immediately flush eyes with plenty of water for at least 15 minutes, lifting
upper and lower eyelids occasionally. Get medical attention if irritation
persists.
5. Fire Fighting Measures
Fire:
Di Sodium Phosphate is not considered to be a fire hazard.
Explosion: Disodium phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire
over Di Sodium Phosphate.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full face piece operated in the pressure
demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill of Di Sodium Phosphate. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities. The toll free number for the US Coast Guard National Response Center is (800) 424-8802.
7. Handling and Storage
Keep Di Sodium Phosphate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Disodium phosphate or Sodium phosphate dibasic may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne
Exposure Limits: None established for Disodium phosphate.
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of
the contaminant at its source, preventing dispersion of it into the general
work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering
controls are not feasible, a particulate respirator (NIOSH type N95 or better
filters) may be worn. If oil particles (e.g. lubricants, cutting fluids,
glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or
instances where the exposure levels are not known, use a full-face
positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators
do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench
facilities in work area.
9. Physical and Chemical Properties
Appearance: Disodium phosphate is white granular powder. Hygroscopic.
Odor: Odorless.
Solubility: Sodium
phosphate dibasic is soluble in water.
Specific Gravity: 2.07 @ 15C/4C
pH:
No information found.
% Volatiles by volume @ 21C (70F):
0
Boiling Point: Not applicable.
Melting Point:
240C (464F) Converts to Na4P2O7
Vapor Density (Air=1):
No information found.
Vapor Pressure (mm Hg):
No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability:
Disodium phosphate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:
Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities: Acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and
pyrogallol.
Conditions to Avoid:
Incompatibles.
11. Toxicological Information
Oral rat LD50: 17 gm/kg. Skin rabbit, standard Draize, 500 mg/24H, mild. Eye rabbit, standard Draize, 500 mg/24H mild.
12. Ecological Information
Environmental Fate: No information found on Disodium
phosphate.
Environmental Toxicity:
No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Disodium phosphate container and unused contents in accordance with federal, state and local requirements.14. Transport Information
Not regulated.
15. Regulatory Information
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No SARA 311/312:
Acute: Yes Chronic: No
Fire: No Pressure: No Reactivity: No (Pure / Solid)
Australian
Hazchem Code: None allocated.
Poison Schedule: None
allocated.
EINECS: Sodium phosphate dibasic is on the European Inventory of Existing
Commercial Chemical Substances.
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC): This product is not classified according to the EU
regulations. S24/25- Avoid contact with skin and eyes.
HMIS (U.S.A.):
Health Hazard: 1
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 1
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified
respirator or equivalent. Safety glasses.
16. Other Information
Disclaimer:
******************************
Our company provides this
Di SODIUM PHOSPHATE, SODIUM
PHOSPHATE DIBASIC MSDS information sheet contained herein in good faith but makes no
representation as to its comprehensiveness or accuracy. This DISODIUM
PHOSPHATE, DIBASIC SODIUM PHOSPHATE, MSDS sheet is intended
only as a guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
******************************
Sodium Phosphate Dibasic manufacturers
Dibasic Sodium Phosphate manufacturers
Disodium Phosphate manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Dibasic Sodium Phosphate Dibasic or Disodium Phosphate IP BP USP NF ACS Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.