|
Mubychem Group, established in 1976, is the pioneer manufacturer of Manganese Chloride Tetrahydrate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Manganese Chloride Tetrahydrate Manufacturers, MSDS Sheet
Manganese Chloride ACS Analytical Reagent FCC Food Grade Manufacturers
Manganese Chloride
Techmical & Pure Crystals
Also ACS AR LR FCC Food Grades
Manganese Chloride MSDS Sheet, Manganese Chloride Tetrahydrate Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
Product
Name:
Manganese Chloride Tetrahydrate
CAS#:
13446-34-9
RTECS:
OO9625000
TSCA:
TSCA
8(b) inventory: Manganese chloride tetrahydrate
Chemical Formula:
MnCl2.4H2O
Section 2: Composition and Information on Ingredients
Composition: Manganese chloride tetrahydrate
CAS #: 13446-34-9
% by Weight – 100%
Section 3: Hazards Identification
Potential Acute Health Effects: Manganese Chloride is very
hazardous in case of ingestion. Hazardous in case of skin contact
(irritant), of eye contact (irritant), of inhalation. Slightly
hazardous in case of skin contact (permeator).
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
The
substance is toxic to lungs, the nervous system, mucous membranes.
Repeated or prolonged exposure to the substance can produce target
organs damage.
Section 4: First Aid Measures
Eye
Contact: Check
for and remove any contact lenses. Immediately flush eyes with
running water for at least 15 minutes, keeping eyelids open. Cold
water may be used. Do not use an eye ointment. Seek medical
attention.
Skin
Contact: After
contact with skin, wash immediately with plenty of water. Gently and
thoroughly wash the contaminated skin with running water and
non-abrasive soap. Be particularly careful to clean folds, crevices,
creases and groin. Cold water may be used. Cover the irritated skin
with an emollient. If irritation persists, seek medical attention.
Serious
Skin Contact: Wash
with a disinfectant soap and cover the contaminated skin with an
anti-bacterial cream. Seek immediate medical attention.
Inhalation: Allow
the victim to rest in a well ventilated area. Seek immediate medical
attention.
Ingestion: Do not
induce vomiting. Examine the lips and mouth to ascertain whether the
tissues are damaged, a possible indication that the toxic material
was ingested; the absence of such signs, however, is not conclusive.
Loosen tight clothing such as a collar, tie, belt or waistband. If
the victim is not breathing, perform mouth-to-mouth resuscitation.
Seek immediate medical attention.
Section 5: Fire and Explosion Data
Flammability of the Product:
Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash
Points: Not
applicable.
Flammable Limits: Not
applicable.
Products of Combustion: Not
available.
Fire
Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks
of explosion of the product in presence of mechanical impact: Not
available.
Risks
of explosion of the product in presence of static discharge: Not
available.
Fire
Fighting Media and Instructions: Not applicable.
Section 6: Accidental Release Measures
Small
Spill: Use
appropriate tools to put the spilled solid in a convenient waste
disposal container. Finish cleaning by spreading water on the
contaminated surface and dispose of according to local and regional
authority requirements.
Large
Spill: Use a
shovel to put the material into a convenient waste disposal
container. Finish cleaning by spreading water on the contaminated
surface and allow to evacuate through the sanitary system. Be
careful that the product is not present at a concentration level
above TLV. Check TLV on the MSDS and with local authorities.
Section 7: Handling and Storage
Precautions: Do not
ingest
Manganese Chloride. Do not breathe dust. Wear suitable protective clothing In
case of insufficient ventilation, wear suitable respiratory
equipment If ingested, seek medical advice immediately and show the
container or the label. Avoid contact with skin and eyes.
Storage: No specific storage is required. Use shelves or
cabinets sturdy enough to bear the weight of the chemicals. Be sure
that it is not necessary to strain to reach materials, and that
shelves are not overloaded.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use
process enclosures, local exhaust ventilation, or other engineering
controls to keep airborne levels below recommended exposure limits.
If user operations generate dust, fume or mist, use ventilation to
keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Splash
goggles. Lab coat. Dust respirator. Be sure to use an
approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash
goggles. Full suit. Dust respirator. Boots. Gloves. A self contained
breathing apparatus should be used to avoid inhalation of the
product. Suggested protective clothing might not be sufficient;
consult a specialist BEFORE handling this product.
Exposure Limits: TWA: 1 STEL: 3 (mg/m3) from ACGIH.
Section 9: Physical and Chemical Properties
Physical
State:
Manganese Chloride is
solid
Appearance:
red
Odor:
none reported
pH: 5.5
Vapor Pressure:
Not applicable.
Vapor Density:
Not available.
Evaporation Rate:
Not applicable.
Viscosity:
Not applicable.
Boiling Point:
1190 deg C; 2174 deg F
Melting Point:
58 deg C
Decomposition Temperature: >
100 deg C
Solubility:
72%
Specific Gravity/Density:2.977 @ 25C
Molecular Formula: MnCl2
Molecular Weight:125.844
Section 10: Stability and Reactivity Data
Stability:
Manganese Chloride is stable.
Instability Temperature: Not
available.
Conditions of Instability: Not available.
Incompatibility with various substances: Not available.
Corrosivity:
Non-corrosive in presence of glass.
Polymerization: No.
Section 11: Toxicological Information
Routes
of Entry: Eye
contact. Inhalation. Ingestion.
Toxicity to Animals: Acute
oral toxicity (LD50): 1454 mg/kg [Rat].
Chronic
Effects on Humans: The
substance is toxic to lungs, the nervous system, mucous membranes.
Other
Toxic Effects on Humans:
Very
hazardous in case of ingestion.
Hazardous in case of skin contact (irritant), of inhalation.
Slightly hazardous in case of skin contact (permeator).
Special
Remarks on Toxicity to Animals: Not available.
Special
Remarks on Chronic Effects on Humans: Animal embryo toxic.
Section 12: Ecological Information
Ecotoxicity: Not
available.
BOD5
and COD: Not
available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely.
However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special
Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Waste Disposal: To be done as per legal requirement.
Section 14: Transport Information
DOT
Classification: Not a
DOT controlled material (United States).
Identification: Not
applicable.
Special
Provisions for Transport: Not applicable.
Section 15: Other Regulatory Information
US Federal
and State Regulations:
Pennsylvania
RTK: Manganese chloride tetrahydrate
Massachusetts
RTK: Manganese chloride tetrahydrate
TSCA
8(b) inventory: Manganese chloride tetrahydrate
SARA
313 toxic chemical notification and release reporting: Manganese
chloride tetrahydrate
OSHA:
Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200).
WHMIS
(Canada): CLASS
D-2A: Material causing other toxic effects (VERY TOXIC).
DSCL
(EEC):
R22-
Harmful if swallowed.
R36/38-
Irritating to eyes and skin.
HMIS
(U.S.A.):
Health
Hazard: 2
Fire
Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health:
2
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves.
Lab
coat.
Dust
respirator. Be sure to use an
approved/certified respirator or
equivalent. Wear appropriate respirator when
ventilation is inadequate.
Splash
goggles.
Section 16: Other Information
Disclaimer:
******************************
Our company provides this Manganese Chloride
MSDS information contained herein in good faith but makes no
representation as to its
comprehensiveness or accuracy. This Manganese Chloride MSDS sheet is intended only as a guide to the appropriate precautionary
handling of the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose. ******************************
Manganese Chloride manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Manganese Chloride Anhydrous Tetrahydrate FCC BP USP... Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.