|
Mubychem Group, established in 1976, is the pioneer manufacturer of Potassium Bromide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Potassium Bromide Manufacturers; MSDS
Potassium Bromide Commercial Pure
Potassium Bromide BP IP USP ACS AR Analytical Reagent Manufacturers
Potassium Bromide
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Potassium Bromide MSDS Sheet, Material safety Data Sheet
1. Product Identification
Synonyms: Bromide salt of potassiumCAS No.: 7758-02-3
Molecular Weight: 119.00
Chemical Formula: KBr
2. Composition/Information on Ingredients
Ingredient: Potassium BromideCAS No.: 7758-02-3
Percent: 100%
Hazardous: Yes
3. Hazards Identification
Emergency OverviewWARNING! HARMFUL IF SWALLOWED OR INHALED. AFFECTS CENTRAL NERVOUS SYSTEM, BRAIN AND EYES. MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.
Potential Health Effects
Inhalation: Dust may cause irritation to the respiratory tract. Symptoms may include coughing, sore throat, and shortness of breath.
Ingestion: It may cause nausea, vomiting and abdominal pain. Ingestions are usually promptly rejected by vomiting, but sufficient absorption may occur to produce central nervous system, eye and brain effects. Symptoms may include skin rash, blurred vision and other eye effects, drowsiness, irritability, dizziness, mania, hallucinations, and coma.
Skin Contact: Dry material may cause mild irritation. Solutions may cause irritation, redness, pain, and skin burns.
Eye Contact: It may cause irritation, redness and pain.
Chronic Exposure: Repeated or prolonged exposure by any route may cause skin rashes (bromaderma). Repeated ingestion of small amounts may cause central nervous system depression, including depression, ataxia, psychoses, memory loss, irritability, and headache.
Aggravation of Pre-existing Conditions: Persons suffering from debilitation, depression, alcoholism, neurological or psychological disorders may be more susceptible to the effects of the substance.
4. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.
Skin Contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician.
Eye Contact: Wash eyes with plenty of water for at least 15 minutes. Call a physician.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard.Explosion: It is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Separate from incompatibilities. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Potassium Bromide is white crystals.Odor: It is odorless.
Solubility: 70g/100g water @ 25C (77F).
Specific Gravity: It has Sp.Gr. 2.75 @ 25C
pH: Aqueous solution is neutral.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 1435C (2615F)
Melting Point: 730C (1346F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.Hazardous Decomposition Products: Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizers, acids, and bromine trifluoride.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Potassium bromide: oral rat LD50: 3070 mg/kg; investigated as a mutagen.12. Ecological Information
Environmental Fate: No information found.Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.14. Transport Information
Not regulated.15. Regulatory Information
Australian Hazchem Code: None allocated.Poison Schedule: None allocated.
16. Other Information
NFPA Ratings: Health: 2 Flammability: 0 Reactivity: 0Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. AFFECTS CENTRAL NERVOUS SYSTEM, BRAIN AND EYES. MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Keep container closed.
Use with adequate ventilation.
Avoid contact with eyes, skin and clothing.
Wash thoroughly after handling.
Label First Aid:
If swallowed, induce vomiting immediately if directed by medical personnel. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. In all cases call a physician.
Disclaimer:
******************************
Our company provides this POTASSIUM BROMIDE MSDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This POTASSIUM BROMIDE MSDS document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************
Potassium Bromide manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Potassium Bromide BP USP FCC Food grade Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.