|
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Acetate Trihydrate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Acetate Trihydrate Manufacturers, MSDS Sheet
MSDS of Sodium Acetate Anhydrous Manufacturers
Specifications and Uses of Sodium Acetate Anhydrous Trihydrate & IP Grade
Sodium Acetate
Trihydrate
Crystals, Trihydrate
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
1. Product Identification
Synonyms: Sodium acetate trihydrate; Acetic acid sodium salt anhydrous.
CAS No.: 6131-90-4 (Trihydrate); 127-09-3 (Anhydrous)
EINECS: EC Number: Trihydrate is not listed. 204-823-8 for anhydrous
Molecular Weight: 136.08
Chemical Formula: CH3COONa.3H2O
2. Composition/Information on Ingredients
Ingredient: Sodium acetate trihydrate
CAS No.: 6131-90-4 (Trihydrate)
Percent: 97 - 100%
Hazardous: Yes
3. Hazards Identification
Emergency Overview
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.
OSHA Hazards: Not reported as hazardous.
HMIS Classification
Health hazard: 1
Flammability: 1
Physical hazards: 0
NFPA Rating
Health hazard: 1
Fire: 1
Reactivity Hazard: 0
Potential Health Effects
Inhalation: It may cause irritation to the respiratory tract.
Symptoms may include coughing, sore throat and labored breathing.
Ingestion: In large doses may produce abdominal pain, nausea, and
vomiting.
Skin Contact: It may cause irritation with redness and pain.
Eye Contact: Sodium acetate trihydrate contact may cause
irritation, redness, and pain.
Chronic Exposure: No information found for Sodium acetate
trihydrate.
Aggravation of Pre-existing Conditions: No information found for
Sodium acetate trihydrate.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get
medical attention.
Ingestion: Never give anything by mouth to an unconscious person.
Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately
flush skin with plenty of water for at least 15 minutes. Remove
contaminated clothing and shoes. Get medical attention. Wash clothing
before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at
least 15 minutes, lifting lower and upper eyelids occasionally. Get
medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is
recommended.
5. Fire Fighting Measures
Flammability of the Product: May pose a fire hazard when exposed to
elevated temperatures or by contact with an ignition source.
Auto-Ignition Temperature: >600C.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: It emits toxic oxides of carbon and acetic acid
when heated to decomposition.
Fire: Sodium acetate trihydrate may ignite at high temperatures.
Explosion: Fine dust dispersed in air in sufficient concentrations, and
in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray. Use means suitable for
extinguishing surrounding fire. Water spray, dry chemical, alcohol foam, or
carbon dioxide.
Special Information In the event of a fire, wear full protective clothing
and NIOSH-approved self-contained breathing apparatus with full face piece
operated in the pressure demand or other positive pressure mode. At high
temperatures or when moistened under fire conditions, it may produce toxic or
irritating fumes.
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate
ventilation. Use appropriate tools to put the spilled solid in a convenient
waste disposal container. Finish cleaning by spreading water on the contaminated
surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the
material into a convenient waste disposal container. Finish cleaning by
spreading water on the contaminated surface and allow evacuating through the
sanitary system.
7. Handling and Storage
Do not breathe dust. Wear suitable protective clothing. In case of insufficient
ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash
hands thoroughly after handling. Provide appropriate exhaust ventilation at
places where dust is formed. If you feel unwell, seek medical attention.
Keep Sodium acetate trihydrate in a tightly closed container, stored in a cool,
dry, ventilated area. Protect against physical damage or contact with oxidizing
material and combustible substances.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general work
area.
Personal Respirators (NIOSH Approved): For conditions of use where
exposure to dust or mist is apparent and engineering controls are not feasible,
a particulate respirator may be worn. For emergencies or instances where the
exposure levels are not known, use a full-face positive-pressure, air-supplied
respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where
dusting or splashing of solutions is possible. Maintain eye wash fountain and
quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust
deposits on floors and other surfaces may pick up moisture and cause the
surfaces to become slippery and present safety hazards. Handle in accordance
with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Sodium acetate trihydrate is white crystals or powder or
granules.
Odor: Practically none. Slight odor of acetic acid may be felt.
Solubility: Readily soluble in water.
pH: 6-10 at 1% solution at 25 C (77F)
Density: 1.45
Molecular Weight: 136.08
Molecular Formula: CH3COONa.3H2O
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not available
Melting Point: 58C
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Sodium acetate trihydrate is stable under ordinary conditions
of use and storage.
Hazardous Decomposition Products: Sodium acetate trihydrate may emit
fumes of acetic acid upon heating and on contact with strong acids. Oxides of
carbon are released on decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Nitric acid, fluoride, potassium nitrate, strong
oxidizers and diketene.
Conditions to Avoid: Moisture, Heat, Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
Oral LD50, rat; 3,530 mg/kg
Dermal LD50, rabbit; >10,000 mg/kg
Irritation, rabbit; Mildly irritating to skin and eyes
Draize test, rabbit, eye: 10 mg Mild;
Draize test, rabbit, skin: 500 mg/24H Mild;
Inhalation, rat: LC50 >30 gm/m3/1H;
Oral, mouse: LD50 = 6891 mg/kg;
Oral, rat: LD50 = 3530 mg/kg;
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available. However it may have mutagenic
effect.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Chronic Effects on Humans: No information found.
Other Toxic Effects on Humans: Hazardous in case of skin contact
(irritant), of ingestion, of inhalation.
Special Remarks on Chronic Effects on Humans: -
Special Remarks on other Toxic Effects on Humans: -
Acute Potential Health Effects:
Inhalation: Sodium acetate trihydrate causes irritation to the
respiratory tract.
Ingestion: Harmful if swallowed. May cause irritation to the
gastrointestinal tract.
Skin Contact: Sodium acetate trihydrate causes irritation to
skin.
Eye Contact: Causes irritation.
Chronic Exposure: NA.
12. Ecological Information
Environmental Toxicity:
Toxicity to fish
LC50 - Pimephales promelas (fathead minnow) - 13,330 mg/l - 120 h
LC50 - Lepomis macrochirus (Bluegill) - 5,000 mg/l - 24 h
LC50 Lepomis macrochirus: 5000 mg/l – 24 h
LC50 Bluegill/Sunfish: 5000 mg/l; 24 h
Data on sodium acetate anhydrous basis.
Toxicity to daphnia
Water Flea Data: 48 Hr EC50 water flea: 5800 mg/l 48 h.
Data on sodium acetate anhydrous basis.
Biodegradability: 99 % - Readily biodegradable
BOD5 and COD: Not available.
Environmental Fate: No information found. The product itself and its products of degradation are not toxic. This chemical
is readily biodegradable and is not likely to bio-concentrate.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT (USA)
Not Regulated
IMDG
Not Regulated
IATA
Not Regulated
15. Regulatory Information
OSHA Hazards: No hazard as per OSHA.
SARA Codes: CAS # 6131-90-4: Not controlled.
SARA 302: No chemicals in this material are subject to the reporting
requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: Not listed.
TSCA: CAS# 6131-90-4 is not on the TSCA Inventory because it is a
hydrate. It is considered to be listed if the CAS number for the
anhydrous form is on the inventory (40CFR720.3(u)(2)). CAS# 127-09-3 is
listed on the TSCA inventory.
Health & Safety Reporting List: None of the chemicals are on the Health &
Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a
Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material
have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals
in this material have an RQ.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances
under the CWA.
None of the chemicals in this product are listed as Priority Pollutants
under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants
under the CWA.
California Prop 65:
This product does not contain any chemicals known to State of California
to cause cancer, birth defects, or any other reproductive harm.
Massachusetts Right To Know Components:
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components:
Sodium acetate
CAS-No.
6131-90-4
New Jersey Right To Know Components:
Sodium acetate
CAS-No.
6131-90-4
EINECS: EC Number: -
European Labeling in Accordance with EC Directives
Hazard Symbols:
Not available
Risk Phrases: -
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6131-90-4: 1
Canada - DSL/NDSL
Anhydrous material CAS# 127-09-3 is listed on Canada's DSL List
Canadian WHMIS Classifications: D2B
This product has been classified in accordance with the hazard criteria
of the Controlled Products Regulations.
CAS# 127-09-3 is not listed on Canada's Ingredient Disclosure List.
Australian Hazchem Code: None
Poison Schedule: None
16. Other Information
Disclaimer:
******************************
Our company provides this Sodium acetate trihydrate MSDS sheet in good faith but
makes no representation as to its comprehensiveness or accuracy. This Sodium
acetate trihydrate MSDS sheet is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using this
product. The above information has been compiled from various sources and has
the possibility of discrepancy and being out-dated information. Individuals
receiving the information must exercise their independent judgment and do
further search in determining its appropriateness for a particular purpose. In
no case shall our company be liable to loss or damages by the product user.
******************************
Sodium Acetate Trihydrate manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Acetate Trihydrate BP USP IP ACS FCC Analytical reagent AR GR Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.