Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Citrate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Citrate Anhydrous and Dihydrate BP Ph Eur USP IP FCC Food Grade Manufacturers
MSDS of Sodium Citrate BP Ph Eur IP USP FCC Food grade Manufacturers
Sodium Citrate
Technical & Pure Crystals
CAS Number 6132-04-3 & 68-04-2, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Sodium Citrate BP Ph Eur Grade Specifications
Sodium Citrate Ph
Eur.
Trisodium Citrate Ph Eur.
C6H5Na3O7,2H2O -- 294.1 CAS Number 6132-04-3
DEFINITION
Trisodium
2-hydroxypropane-1,2,3-tricarboxylate dihydrate.
Content
99.0 per cent to 101.0
per cent (anhydrous substance).
CHARACTERS
Appearance
White or almost white,
crystalline powder or white or almost white, granular crystals, slightly
deliquescent in moist air.
Solubility
Freely soluble in
water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. To 1 ml of solution
S (see Tests) add 4 ml of water. The solution gives the reaction
of citrates.
B. 1 ml of solution S
gives reaction of sodium.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R
prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of
solution
Solution S is clear and colourless.
Acidity or
alkalinity
To 10 ml of solution S
add 0.1 ml of phenolphthalein solution. Not more than 0.2 ml of
0.1M hydrochloric acid or 0.1 M sodium hydroxide is
required to change the colour of the indicator.
Readily
carbonisable substances
To 0.20 g of the
powdered substance to be examined add 10 ml of sulphuric acid and
heat in a water-bath at 90 ± 1 °C for 60 min. Cool rapidly. The solution
is not more intensely coloured than reference solution.
Chlorides
Maximum 50 ppm.
Oxalates
Maximum 300 ppm.
Sulphates
Maximum 150 ppm.
Heavy metals
Maximum 10 ppm.
Water
11.0 per cent to 13.0
per cent, determined on 0.300 g. After adding the substance to be examined, stir for 15
min before titrating.
Sodium Citrate USP Grade Specifications
Sodium Citrate USP
C6H5Na3O7 (anhydrous)
258.07
1,2,3-Propanetricarboxylic acid, 2-hydroxy-, trisodium salt.
Trisodium citrate (anhydrous) [CAS 68-04-2]
Trisodium citrate dihydrate 294.10 [CAS 6132-04-3]
Sodium Citrate is anhydrous or contains two molecules of water of hydration. It contains not less than 99.0 percent and not more than 100.5 percent of C6H5Na3O7, calculated on the anhydrous basis.
Identification—
A: A solution (1 in 20) responds to the tests for Sodium and for
Citrate.
B: Upon ignition, it
yields an alkaline residue which effervesces when treated with 3 N
hydrochloric acid.
Alkalinity— A solution
of 1.0 g in 20 mL of water is alkaline to litmus paper, but after the
addition of 0.20 mL of 0.10 N
sulfuric acid no pink color is produced by 1 drop of phenolphthalein TS.
Water— Dry it at 180
for 18 hours: the anhydrous form loses not more than 1.0%, and the
hydrous form between 10.0% and 13.0%, of its weight.
Tartrate— the limit is
0.001%.
Sodium Citrate FCC Food Grade Specifications
Trisodium Citrate
C6H5Na3O7 Formula wt,
anhydrous 258.07
C6H5Na3O7·2H2O Formula
wt, dihydrate 294.10
INS: 331(iii) CAS:
anhydrous 68-04-2
CAS: dihydrate
6132-04-3
DESCRIPTION
Sodium Citrate occurs
as colorless crystals or as a white, crystalline powder. It is anhydrous
or contains two molecules of water of crystallization. One gram of the
dihydrate dissolves in 1.5 mL of water at 25° and in 0.6 mL of boiling
water. It is insoluble in alcohol.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for
Sodium and for
Citrate.
Assay: Not less
than 99.0% and not more than 100.5% of C6H5Na3O7, calculated on the
anhydrous basis.
Alkalinity: Passes test.
Lead: Not more
than 2 mg/kg.
Water: Anhydrous: Not more than 1%;
Dihydrate: Between 10.0% and
13.0%.
Sodium Citrate BP USP IP FCC Food grade Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Citrate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
29-Apr-2022