Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Thiosulphate Thiosulfate Anhydrous, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Manufacturer Exporter IndiaJumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.Chemicals Container Leak Proof Drum Quick DeliveryProduct Image; Liquid ProductsExporter Importer

Sodium Thiosulphate Thiosulfate Anhydrous Manufacturers, MSDS Sheet

MSDS of Sodium Thiosulphate Thiosulfate Anhydrous Manufacturers

MSDS of Hypo, Sodium Thiosulfate Thiosulphate Pentahydrate Manufacturers

Sodium Thiosulphate Thiosulfate Commercial Pentahydrate & Anhydrous Manufacturers

Sodium Thiosulphate Thiosulfate Anhydrous Pentahydrate BP IP USP  ACS AR Analytical Reagent FCC Food Grade Manufacturers

Sodium Thiosulfate Anhydrous
Technical & Pure Sodium Thiosulphate Anhydrous
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Sodium Thiosulfate Thiosulphate Anhydrous

Sodium Thiosulfate Anhydrous MSDS Sheet, Material safety Data Sheet

1. Product Identification

Synonyms: Sodium thiosulfate anhydrous, Ametox, Antichlor, Sodium Hyposulfite anhydrous, Thiosulfuric Acid disodium salt anhydrous, Hypo anhydrous, Sodium thiosulphate anhydrous, Sodothiol, Sulfothiorine.
CAS No.
: 7772-98-7 for anhydrous
EINECS: EC Number: 231-867-5
Molecular Weightt: 158.11
Chemical Formula: Na2S2O3

2. Composition/Information on Ingredients

Ingredient: Sodium thiosulfate anhydrous
CAS No.: 7772-98-7 for anhydrous
Percent: 97 - 100%
Hazardous: Yes

3. Hazards Identification

Emergency Overview
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT. REALEASES TOXIC GASES AT HIGH TEMPERATURE DUE TO DECOMPOSITION.

OSHA Hazards: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
HMIS Classification
Health hazard: 2
Flammability: 0
Physical hazards: 0
NFPA Rating
Health hazard: 1
Fire: 0
Reactivity Hazard: 0

Potential Health Effects
Inhalation: It may cause irritation to the respiratory tract. Symptoms may include coughing, sore throat and labored breathing.
Ingestion: It can irritate the tissues of the mouth, esophagus, and other tissues of the digestive system. In large doses may produce abdominal pain, nausea, and vomiting.
Skin Contact:
It may cause irritation with redness and pain.
Eye Contact: Sodium thiosulfate anhydrous contact may cause irritation, redness, and pain.
Chronic Exposure: No information found for Sodium thiosulfate anhydrous.
Aggravation of Pre-existing Conditions: No information found for Sodium thiosulfate anhydrous.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.

5. Fire Fighting Measures

Flammability of the Product: May pose a fire hazard when exposed to elevated temperatures or by contact with an ignition source.
Auto-Ignition Temperature: NA.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: It emits toxic oxides of carbon and oxides of sulfur when heated to decomposition.
Fire: Sodium thiosulfate anhydrous may ignite at high temperatures.
Explosion: An explosion may occur if triturated with nitrates, chlorates, or permanganates. Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source may pose dust explosion hazard.
Fire Extinguishing Mediaa: Water spray. Use means suitable for extinguishing surrounding fire. Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information
  In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system.

7. Handling and Storage

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Sodium thiosulfate anhydrous in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with oxidizing material and combustible substances.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Sodium thiosulfate anhydrous is white powder or granules.
Odor: None
Solubility: Readily soluble in water
pH: 6-9 at 1% solution at 25 C (77F)
Density: 1.67
Molecular Weight: 158.11
Molecular Formula: Na2S2O3
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not available
Melting Point: NA
Vapor Density (Air=1)
: No information found
Vapor Pressure (mm Hg): No information found
Evaporation Rate (BuAc=1): No information found

10. Stability and Reactivity

Stability: Sodium thiosulfate anhydrous is stable under ordinary conditions of use and storage. Avoid heat and moisture.
Hazardous Decomposition Products: It emits toxic oxides of carbon and oxides of sulfur hydrogen sulfide along with sodium oxide when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Nitric acid, fluoride, sodium and potassium nitrate, strong oxidizers, mercury, chlorine, iodine and diketene.
Conditions to Avoid: Moisture, Heat, Incompatibles.

11. Toxicological Information

Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
LD50 is not available.
LC50 not available.
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available. However it may have mutagenic effect.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Chronic Effects on Humans: No information found.
Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Special Remarks on Chronic Effects on Humans: -
Special Remarks on other Toxic Effects on Humans
: -
Acute Potential Health Effects:
Inhalation
: Sodium thiosulfate anhydrous causes irritation to the respiratory tract and mucus membrane.
Ingestion: Harmful if swallowed. May cause irritation to the gastrointestinal tract.
Skin Contact: Sodium thiosulfate anhydrous causes irritation to skin.
Eye Contact: Causes irritation.
Chronic Exposure: NA.

Thiosulfate occurs naturally in the body.

12. Ecological Information

Environmental Toxicity: Not available.
Biodegradability
: -
BOD5 and COD: Not available.
Environmental Fate: No information found. The product itself and its products of degradation are not toxic. This chemical is readily biodegradable and is not likely to bio-concentrate.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

14. Transport Information

DOT (USA)
Not Regulated

IMDG
Not Regulated

IATA
Not Regulated

15. Regulatory Information

OSHA Hazards: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
SARA Codes: 7772-98-7: Not controlled.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: -
TSCA: CAS# 7772-98-7 is listed on the TSCA inventory.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
Section 12b: None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.

California Prop 65:
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
Massachusetts Right To Know Components: -
Pennsylvania Right To Know Components: -
New Jersey Right To Know Components: -

EINECS: EC Number: -
European Labeling in Accordance with EC Directives
Hazard Symbols:
Not available
Risk Phrases: -
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7772-98-7: 0

DSCL (EEC): R36- Irritating to eyes.
Canada - DSL/NDSL
Canadian WHMIS Classifications: D2A
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations.
CAS# 127-09-3 is not listed on Canada's Ingredient Disclosure List.

Australian Hazchem Code: None
Poison Schedule: None

16. Other Information

Disclaimer:
******************************
Our company provides this Sodium thiosulfate anhydrous MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium thiosulfate anhydrous MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
******************************

Sodium Thiosulfate Thiosulphate anhydrous manufacturers at:

MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: us@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride
Magnesium Chloride Magnesium Sulfate
Potassium Chloride Sodium Acetate
Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol
Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide
Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate
Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride
Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue
Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate
Sodium Acetate Sodium Hydroxide Pellets
Sodium Phosphate Sodium Thiosulfate
Sodium Propionate Zinc Chloride
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate
Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate
Cupric Chloride  
Potassium Phosphate  
Sodium Formate Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Sodium Phosphate
Tertiary Butylhydroquinone Zinc Sulphate
Zinc Ammonium Chloride Flux  

Sodium Thiosulfate Manufacturers Sodium Thiosulphate Manufacturers Sodium Thiosulfate Thiosulphate Anhydrous Manufacturers

Global or International Sodium Thiosulfate Sodium Thiosulfate  Anhydrous BP USP IP ACS FCC Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.