|
Mubychem Group, established in 1976, is the pioneer manufacturer of Ammonium Bromide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Ammonium Bromide Manufacturers, MSDS Sheet
Ammonium Bromide BP FCC ACS AR Analytical Reagent Food Grade Manufacturers
Ammonium Bromide
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Ammonium Bromide MSDS Sheet; Material Safety Data Sheet
Material Safety Data Sheet
Section 1: Chemical Product and Identification
Product
Name: Ammonium bromide
Synonym: -
Chemical
Formula: NH4Br
CAS No: 12124-97-9
Section 2: Composition and Information on Ingredients
Composition
Name: Ammonium Bromide
CAS #:: 12124-97-9
% by Weight: 100
Section 3: Hazards Identification
Potential Acute Health Effects:
Hazardous
in case of skin contact (irritant), of eye contact (irritant), of ingestion, of
inhalation. Slightly hazardous in case of skin contact (permeator).
Potential Chronic Health Effects:
Carcinogenic Effects: Not available.
Mutagenic
Effects: Not available.
The
substance is toxic to lungs, mucous membranes. Repeated or prolonged exposure to
the substance can produce target organs damage.
Section 4: First Aid Measures
Eye
Contact: Check for and remove any contact lenses. In case of contact,
immediately flush eyes with plenty of water for at least 15 minutes. Cold water
may be used. Get medical attention.
Skin
Contact: In case of contact, immediately flush skin with plenty of
water. Cover the irritated skin with an emollient. Remove contaminated clothing
and shoes. Cold water may be used. Get medical attention.
Serious
Skin Contact: Wash with a disinfectant soap and cover the
contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: If inhaled, remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get medical
attention.
Serious
Inhalation: Not available.
Ingestion: Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person. If large
quantities of this material are swallowed, call a physician. immediately. Loosen
tight clothing such as a collar, tie, belt or waistband.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Fire
Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of
explosion of the product in presence of mechanical impact: Not available.
Risks of
explosion of the product in presence of static discharge: Not available.
Fire
Fighting Media and Instructions: Not applicable.
Section 6: Accidental Release Measures
Small
Spill: Use appropriate tools to put the spilled solid in a convenient
waste disposal container. Finish cleaning by spreading water on the contaminated
surface and dispose of according to authority requirements.
Large
Spill: Use a shovel to put the material into a convenient waste
disposal container. Finish cleaning by spreading water on the contaminated
surface and drain.
Section 7: Handling and Storage
Precautions: Do not breathe dust. Wear suitable protective clothing.
In case of insufficient ventilation, wear suitable respiratory equipment. If you
feel unwell, seek medical attention and show the label when possible. Avoid
contact with skin and eyes.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated
area.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust
ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use
ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal
Protection: Splash goggles. Lab coat. Dust respirator. Be sure to use
an approved/certified respirator or equivalent. Gloves.
Personal
Protection in Case of a Large Spill: Splash goggles. Full suit. Dust
respirator. Boots. Gloves. A self contained breathing apparatus should be used
to avoid inhalation of the product. Suggested protective clothing might not be
sufficient; consult a specialist before handling this product.
Exposure
Limits: Not available.
Section 9: Physical and Chemical Properties
Physical
state and appearance: White solid.
Molecular Weight: 97.94 g/mole
pH (1%
soln/water): Not available.
Boiling
Point: Not available.
Melting
Point: Sublimes.
Specific
Gravity: 2.429 (Water = 1)
Vapor
Pressure: Not applicable.
Solubility: Easily soluble in cold water.
Section 10: Stability and Reactivity Data
Stability: The product is stable.
Instability Temperature: Not available.
Corrosivity: Non-corrosive in presence of glass.
Polymerization: Will not occur.
Section 11: Toxicological Information
Routes
of Entry: Eye contact. Inhalation. Ingestion.
Toxicity
to Animals:
LD50: Not
available.
LC50: Not
available.
Chronic
Effects on Humans: Causes damage to the following organs: lungs,
mucous membranes.
Other
Toxic Effects on Humans:
Hazardous
in case of skin contact (irritant), of ingestion, of inhalation.
Slightly
hazardous in case of skin contact (permeator).
Special
Remarks on Chronic Effects on Humans: Passes through the placental
barrier in human.
Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and
COD: Not available.
Products
of Biodegradation: Possibly hazardous short term degradation products
are not likely. However, long term degradation products may arise.
Toxicity
of the Products of Biodegradation: The products of degradation are
more toxic.
Special
Remarks on the Products of Biodegradation: Not available.
Section 13: Disposal Considerations
Check with all applicable local, regional, and national laws and regulations. Local regulations may be more stringent than regional or national regulations. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
Section 14: Transport Information
DOT
Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Section 15: Other Regulatory Information
Federal
and State Regulations:
Pennsylvania RTK: Ammonium bromide
Massachusetts RTK: Ammonium bromide
TSCA 8(b)
inventory: Ammonium bromide
Other
Regulations: OSHA: Hazardous by definition of Hazard Communication
Standard (29 CFR 1910.1200).
Other
Classifications:
WHMIS
(Canada): CLASS D-2A: Material causing other toxic effects (VERY
TOXIC).
DSCL
(EEC): R36/38- Irritating to eyes and skin.
HMIS (U.S.A.):
Health Hazard: 2; Fire Hazard: 0; Reactivity: 0; Personal Protection: E
National
Fire Protection Association (U.S.A.):
Health: 2; Flammability: 0; Reactivity: 0
Protective Equipment:
Gloves.
Lab coat.
Dust
respirator.
Be sure to
use an approved/certified respirator or equivalent. Wear appropriate respirator
when ventilation is inadequate.
Splash
goggles.
Section 16: Other Information
Disclaimer:
**********************************
Our company provides this Ammonium Bromide MSDS information sheet
in good faith
but makes no representation as to its comprehensiveness or accuracy. This
Ammonium Bromide MSDS sheet is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using this
product. Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
**********************************
Ammonium Bromide manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Ammonium Bromide Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.